| 尺寸 | 客户要求 |
|---|---|
| 防护等级 | IP65 |
| 光通量 | 90-110 |
| 色温 | 2500 |
| 寿命 | 50000 |
| 输入电压 | 12V |
| 外壳材质 | 压铸铝 |
| 品牌 | 浩洋 |
| 型号 | 12V30W |
| 加工定制 | 是 |
| 灯光颜色 | 暖白 |
| LED灯珠颗数 | 30 |
LED路灯与常规路灯不同的是，LED光源采用低压直流供电、由GaN基功率型蓝光LED与黄色合成的高效白光，具有高效、安全、节能、环保、寿命长、响应速度快、显色指数高等独特优点，可广泛应用于道路。外罩可用制作，耐高温达135度，耐低温达-45度。
*寿命长：能使用5万小时以上，提供三年的质量保证。不足之处**是电源的寿命得不到保证。
Long life: can usemore than 50,000 hours to provide three years of quality assurance. Thedownside is that the life of the power supply is not guaranteed.
*光效高：采用≥100LM以上的芯片，相对于传统高压钠灯能节能75%以上。
High luminousefficiency: the use of ≥ 100LM above the chip, compared to thetraditional high pressure sodium lamp can save more than 75%.
*安装简便：无需加埋电缆无需整流器等，直接将安装于灯杆接上或者将光源嵌套原有灯壳。
Easy installation:no need to add the cable without rectifier, etc., will be installed directly onthe pole or the original light source nested light shell.
*散热控制出色：夏天温度控制在45度以下，并采用被动散热方式，夏天的散热保障不足。
Excellent heatcontrol: summer temperature control below 45 degrees, and the use of passivecooling, summer heat protection.
*质量可靠：电路电源全部采用高质量元器件，每颗LED都有单独过流保护，无需担心损坏。
Reliable quality:all the use of high-quality circuit components, each LED has a separateover-current protection, no need to worry about damage.
*光色均匀：不加透镜，不以提高亮度而牺牲均匀光色，从而保证无光圈光色均匀。
Light coloruniformity: no lens, not to improve the brightness at the expense of uniformlight color, so as to ensure that no aperture light color uniform.
* 灯具电性能
LED路灯在标称的额定电源电压及额定频率下工作时，其实际消耗的功率与额定功率之差不应大于10%，功率因素不应小于0．92。
lamp electricalperformance
LED lights in thenominal power supply rated voltage and rated frequency, the actual powerconsumption and the difference between the rated power should not be greaterthan 10%, power factor should not be less than 0.92.
* 防护等级
LED路灯防护等级A级品不应低于IP67；B级品不应低于IP66；C级品不应IP65。
degree ofprotection
LED lightsprotection class A grade should not be less than IP67; B grade products shouldnot be lower than IP66; C grade products should not IP65.
* 平均寿命
LED路灯的额定平均寿命不应低于30000h。
Average life expectancy
***大温度
LED路灯额定**大温度Tc值不应大于58℃。
maximumtemperature
LED street lamprated maximum temperature Tc value should not be greater than 58 ℃.
* **大热沉温度
灯具内各个 LED管的**大热沉温度不应大于65℃。
maximum heat sinktemperature
Lamps within theLED tube maximum heat sink temperature should not be greater than 65 ℃.
LED灯具参数
*LED灯具主体由铝合金高压压铸成型，应具有铝纯度高，耐腐蚀性强，外观简洁，线条流畅，结构牢固，表面喷塑或烤漆防腐处理、光洁美观。要求质量稳定附着力好，不褪色、不脱落。
LED lamp body bythe aluminum alloy high-pressure die-casting molding, should have high purityaluminum, corrosion resistance, the appearance of simple, smooth lines, solidstructure, the surface spray or paint anti-corrosion treatment, smooth andbeautiful. Requires good quality and good adhesion, do not fade, do not falloff.
*LED灯具反光器采用高纯铝压制成型，表面氧化后镀二氧化硅处理，表面无明显划痕，配光合理，光效高，低眩光光学系统。
LED lamp reflectorwith high-purity aluminum compression molding, surface oxidation after platingsilicon dioxide treatment, the surface without obvious scratches, with lightreasonable, high luminous efficiency, low glare optical system.
*LED灯具的灯罩透光率达90%以上；灯罩表面无气泡、明显的划痕和裂纹。
LED lamp shadelight transmission rate of 90% or more; shade surface without bubbles, obviousscratches and cracks.
*LED灯具灯头，组成内换泡结构，内部零部件采用防火阻燃材料、外露紧固件为不锈钢材质。
LED lamps andlanterns, the composition of the internal bubble structure, the internal partsof the fire retardant materials, exposed fasteners for the stainless steel.
*LED灯具的绝缘电阻值不小于2MΩ，内部接线为铜芯双层护套绝缘线，芯线截面积不小于1.5mm2,橡胶或聚氯乙稀（PVC）绝缘电线的绝缘厚度不小于0.6mm。
LED insulationresistance of the lamp is not less than 2MΩ, the internal wiring for the copperdouble-layer jacket insulated wire, core cross-sectional area of not less than1.5mm2, rubber or polyvinyl chloride (PVC) insulated wire insulation thicknessof not less than 0.6mm.
*LED灯具为铝制品，表面聚酯喷塑5mm钢化玻璃,防水密封圈
LED lamps foraluminum products, the surface of polyester spray 5mm tempered glass,waterproof seals
*LED灯具防护等级、密封性能：电器腔IP68；
LED lightingprotection class, sealing performance: electrical cavity IP68;
