包装 | 纸箱 |
---|---|
材质 | 树脂 |
产地 | 广东 |
规格 | 16*10*28CM |
品种 | 千层石 |
颜色 | 青色 |
商品品牌 | 点色 |
商品型号 | SZPB-02 |
园林用途 | 假山 |
流沙瀑布操作说明
Installation Instructions of Waterfall of sand
1) 固定好位置,尽可能不要让水漫过整个产品,防止流沙溢出。
1. Fixing the position, the water could not over the whole product which can prevent the sand overflow.2) 选择一个可调的大流量气泵
2. Choosing the adjustable and high flow air pump3) 打开气泵后慢慢加进水晶砂,太多会压堵气孔,太少效果不好,由于各位贵宾使用的气泵性能有差别,调教必须靠贵宾亲自动手,耐心调整,谢谢。
3. Turn on the air pump, put the appropriate sand into the sand cup. (while the sand is too much will block the hole, but too small is not good for landscaping.) As different air pump has different performance, pls pay patience to make it. Thanks!
故障排除:
Trouble Removal
1) 有气出没砂流,A调大出气量;B检查流砂量多少;
1. There is Air bubbles but no sand flowingA: Turn up the air pump to make more air
B: Check the quantity of flowing sand
2) 气体从砂杯冒出:检查产品安防的角度是否向后倾斜,调整前后角度。
2. The air bubbles come from the sand cupTo check the angle of the installation if it is lean back, then adjust the angle.
3) 流沙流出砂杯范围以外,检查产品安防的角度是否偏向一边,调整产品安防的角度。
3. The sand outflow from the sand cupTo check angle of products if it is tend to one side, to adjust the angle of installation.
4) 没气没流沙:检查是否流沙过量添加堵住气孔,清理一部分流沙。
4. No air bubbles and No sand flowingTo check the quantity of sand if it is too much to block the air hole, remove some sand